Drivemonitor v5.5: A Comprehensive Guide
If you are looking for a reliable and versatile tool to commission, configure, monitor, and diagnose your Siemens drives, you might want to consider Drivemonitor v5.5. This software is designed to work with various device families, such as SIMOVERT MASTERDRIVES, MICROMASTER, SIMOREG, and SIMADYN D. In this article, we will explain what Drivemonitor v5.5 is, what features and benefits it offers, how to download and install it, how to use it, and what alternatives are available.
What is Drivemonitor v5.5?
Drivemonitor v5.5 is a commissioning tool that allows you to communicate with your Siemens drives via serial interface or PROFIBUS. You can use it to set parameters, read status information, perform tests, and troubleshoot errors. Drivemonitor v5.5 can also be integrated with Drive ES Basic, which enables you to access the drives from the SIMATIC Manager and archive data in the S7 project.
drivemonitor v5.5 download
Features and benefits of Drivemonitor v5.5
Some of the main features and benefits of Drivemonitor v5.5 are:
It supports a wide range of Siemens drives, including SIMOVERT MASTERDRIVES, MICROMASTER 3, MICROMASTER 4, SIMOREG DC Master, and SIMADYN D.
It provides a user-friendly graphical interface that allows you to view and modify drive parameters in various formats, such as tables, lists, graphs, or diagrams.
It offers various functions for commissioning and configuring drives, such as parameter upload/download, parameter comparison, parameter backup/restore, parameter printout, parameter import/export, etc.
It enables you to monitor and diagnose drives in real time, such as reading status information, displaying error messages, performing tests, resetting faults, etc.
It allows you to communicate with drives via serial interface or PROFIBUS, depending on the drive type and the available hardware.
It can be integrated with Drive ES Basic, which enhances the functionality and convenience of Drivemonitor by enabling communication beyond network boundaries (routing), data archiving in the S7 project, and direct access from the SIMATIC Manager.
How to download and install Drivemonitor v5.5
System requirements and compatibility
Before you download and install Drivemonitor v5.5, you should check the system requirements and compatibility of your PC/PG and your operating system. The following table summarizes the minimum requirements for running Drivemonitor v5.5:
Component
Requirement
CPU
Pentium III 800 MHz or higher
RAM
256 MB or higher
HDD
500 MB free space or higher
Display
1024 x 768 pixels or higher
Interface
Serial interface (RS232) or PROFIBUS interface (MPI/DP)
Operating system
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
You should also check the compatibility of your drive type and firmware version with Drivemonitor v5.5. The following table lists the supported device families and firmware versions for Drivemonitor v5.5:
drivemonitor v5.5 sp2 download
drivemonitor v5.5 sp2 hf1 download
drivemonitor v5.5 windows 10 installation
drivemonitor v5.5 for simovert masterdrives
drivemonitor v5.5 for micromaster and simoreg
drivemonitor v5.5 latest version
drivemonitor v5.5 error messages
drivemonitor v5.5 compatibility issues
drivemonitor v5.5 zip folder download
drivemonitor v5.5 service packs download
drivemonitor v5.5 release notes
drivemonitor v5.5 user manual
drivemonitor v5.5 tutorial
drivemonitor v5.5 troubleshooting guide
drivemonitor v5.5 system requirements
drivemonitor v5.5 license key
drivemonitor v5.5 free trial
drivemonitor v5.5 update
drivemonitor v5.5 support forum
drivemonitor v5.5 faq
drivemonitor v5.6 download
drivemonitor v6 download
drive es basic maintenance v5.6 sp2 download
drive es basic maintenance v6 download
drive es basic maintenance with drivemonitor v5.5
drive es basic maintenance with drivemonitor v6
siemens drivemonitor software download
siemens drivemonitor software update
siemens drivemonitor software manual
siemens drivemonitor software support
siemens drive monitor software free download
siemens drive monitor software crack
siemens drive monitor software license
siemens drive monitor software tutorial
siemens drive monitor software installation guide
how to install siemens drive monitor software on windows 10
how to use siemens drive monitor software for masterdrives and simoreg drives
how to fix siemens drive monitor software errors and issues
how to upgrade siemens drive monitor software to the latest version
how to contact siemens drive monitor software customer service
Device family
Firmware version
SIMOVERT MASTERDRIVES
VC: 1.0 - 3.0MC: 1.0 - 3.0HC: 1.0 - 3.0AC: 1.0 - 3.0DC: 1.0 - 3.0Compact Plus: 1.0 - 3.0
MICROMASTER 3
MM420: AOP11 - AOP13MM430: AOP11 - AOP13MM440: AOP11 - AOP13
MICROMASTER 4
MM420: BOP2x - BOP2xMM430: BOP2x - BOP2xMM440: BOP2x - BOP2x
SIMOREG DC Master
6RA70: CUD1 - CUD36RA80: CUD1 - CUD3
SIMADYN D
T400, T300, T100, S100, S120, S150, S300, S400, S500, S600, S700, S800, S900, S1000, S1100, S1200, S1300, S1400, S1500, S1600, S1700, S1800, S1900
Download links and instructions
To download Drivemonitor v5.5, you need to have a valid license and a registered account on the Siemens Industry Online Support website. You can find the download link for Drivemonitor v5.5 under the following path:
You can also use the following direct link to access the download page:
On the download page, you will find the following files:
DriveMonitor_V55_SP2_HF1.zip: This is the main installation file for Drivemonitor v5.5 SP2 HF1. It contains the setup.exe file and the readme.txt file.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.pdf: This is the license key request form for Drivemonitor v5.5 SP2 HF1. You need to fill out this form and send it to Siemens to obtain your license key.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.doc: This is the same as the previous file, but in Word format.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.rtf: This is the same as the previous file, but in RTF format.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.txt: This is the same as the previous file, but in TXT format.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.xml: This is the same as the previous file, but in XML format.
Licence_Key_Request_DriveMonitor_V55_SP2_HF1.html: This is the same as the previous file, but in HTML format.
Licence_Key_Request_Drive _Monitor_V55_SP2_HF1.pdf: This is the same as the previous file, but in PDF format.
To install Drivemonitor v5.5 SP2 HF1, you need to follow these steps:
Download the DriveMonitor_V55_SP2_HF1.zip file and extract it to a folder on your PC/PG.
Run the setup.exe file and follow the instructions on the screen.
Choose the installation language and the installation path.
Select the components you want to install. You can choose between Drivemonitor, Drive ES Basic, and Drive ES Basic Maintenance.
Enter your license key when prompted. You can obtain your license key by filling out and sending the license key request form to Siemens.
Wait for the installation to complete and restart your PC/PG if necessary.
Troubleshooting tips
If you encounter any problems or errors during the download or installation of Drivemonitor v5.5 SP2 HF1, you can try the following tips:
Make sure your PC/PG meets the system requirements and compatibility criteria for Drivemonitor v5.5 SP2 HF1.
Make sure you have a valid license key and a registered account on the Siemens Industry Online Support website.
Make sure you have a stable internet connection and enough disk space for downloading and installing Drivemonitor v5.5 SP2 HF1.
Make sure you have the appropriate interface and cable for connecting your PC/PG to your drive.
Make sure you have the latest firmware version for your drive.
Make sure you have the latest updates and patches for your operating system and other software applications.
Check the readme.txt file and the online help for more information and guidance on Drivemonitor v5.5 SP2 HF1.
Contact Siemens technical support if you need further assistance or have any questions.
How to use Drivemonitor v5.5
Once you have downloaded and installed Drivemonitor v5.5 SP2 HF1, you can start using it to commission, configure, monitor, and diagnose your Siemens drives. Here are some of the main functions and features of Drivemonitor v5.5 that you can use:
Commissioning and configuring drives
Drivemonitor v5.5 allows you to set up and adjust the parameters of your drives according to your application requirements. You can use various formats and methods to view and modify the parameters, such as tables, lists, graphs, or diagrams. You can also use functions such as parameter upload/download, parameter comparison, parameter backup/restore, parameter printout, parameter import/export, etc. to manage your parameter data more efficiently.
To commission and configure your drives with Drivemonitor v5.5, you need to follow these steps:
Connect your PC/PG to your drive via serial interface or PROFIBUS.
Start Drivemonitor v5.5 from the Windows Start menu or from the SIMATIC Manager if you have integrated it with Drive ES Basic.
Select the device family and type of your drive from the device selection window.
Select the communication interface and settings from the communication window.
Establish communication with your drive by clicking on the connect button or pressing F9.
Select the parameter view mode from the toolbar or the menu bar. You can choose between table view, list view, graph view, or diagram view.
Select the parameter group or subgroup from the tree view on the left side of the window. You can also use the search function or the filter function to find specific parameters.
Select the parameter you want to view or modify from or the menu bar. You can choose between status view, error view, test view, or data view.
Select the data group or subgroup from the tree view on the left side of the window. You can also use the search function or the filter function to find specific data.
Select the data you want to view or analyze from the table view, list view, graph view, or diagram view on the right side of the window.
View the data value, unit, description, and range in the status bar at the bottom of the window.
Analyze the data by using various functions, such as zooming, scaling, cursoring, etc.
Record the data by clicking on the record button or pressing F5. You can also use the playback button or F6 to replay the recorded data.
Export the data by clicking on the export button or pressing F7. You can choose between various formats, such as CSV, TXT, XLS, etc.
Perform tests by clicking on the test button or pressing F8. You can choose between various tests, such as ramp test, step test, frequency test, etc.
Reset faults by clicking on the reset button or pressing F11. You can also view and acknowledge error messages by clicking on the error button or pressing F4.
Repeat steps 6 to 10 for other data you want to monitor and diagnose.
Disconnect from your drive by clicking on the disconnect button or pressing F12.
Archiving and restoring data
If you have integrated Drivemonitor v5.5 with Drive ES Basic, you can also archive and restore your parameter and monitoring data in the S7 project. This allows you to store your data in a central location and access it from the SIMATIC Manager. You can also use this function to transfer your data between different drives or PC/PGs.
To archive and restore your data with Drivemonitor v5.5 and Drive ES Basic, you need to follow these steps:
Connect your PC/PG to your drive via serial interface or PROFIBUS.
Start Drivemonitor v5.5 from the Windows Start menu or from the SIMATIC Manager if you have integrated it with Drive ES Basic.
Select the device family and type of your drive from the device selection window.
Select the communication interface and settings from the communication window.
Establish communication with your drive by clicking on the connect button or pressing F9.
Select the archive mode from the toolbar or the menu bar. You can choose between parameter archive or data archive.
Select the S7 project and the drive station from the archive window.
Select the data you want to archive or restore from the table view on the right side of the window.
Archive the data by clicking on the archive button or pressing F10. You can also use the compare button or F9 to compare the data between the drive and the S7 project.
Restore the data by clicking on the restore button or pressing F11. You can also use the delete button or F12 to delete the data from the S7 project.
Repeat steps 6 to 10 for other data you want to archive or restore.
Disconnect from your drive by clicking on the disconnect button or pressing F12.
Alternatives to Drivemonitor v5.5
Drivemonitor v5.5 is not the only commissioning tool available for Siemens drives. Depending on your drive type and application, you might want to consider other alternatives that offer different features and benefits. Here are some of the most popular alternatives to Drivemonitor v5.5:
Drive ES Basic Maintenance
Drive ES Basic Maintenance is a simplified version of Drive ES Basic that allows you to access your drives from the SIMATIC Manager without installing Drivemonitor. You can use it to perform basic functions, such as parameter upload/download, parameter comparison, parameter backup/restore, etc. However, you cannot use it to monitor and diagnose your drives in real time, perform tests, reset faults, etc. Drive ES Basic Maintenance is suitable for users who only need to perform simple maintenance tasks on their drives and do not need advanced functions and features.
Starter
Starter is a commissioning tool that allows you to communicate with your Siemens drives via PROFIBUS, PROFINET, or USB. You can use it to set parameters, read status information, perform tests, and troubleshoot errors. Starter can also be integrated with TIA Portal, which enables you to access the drives from the TIA Portal project and archive data in the TIA Portal project. Starter supports a wide range of Siemens drives, including SINAMICS G, SINAMICS S, SINAMICS DCM, SIMOTICS S-1FK7/1FK8/1FT7/1FT6/1PH8/1FE1/1FN3/1FW3/1FN6/1FW6/1FN1/1FW2/1FN2/1FW4/1FN4/1FW8/1FN5/1FW9/1FN8/1FW7/S-1FL6/S-1FK2/S-1FL8/S-1FK4/S-1FL9/S-1FK6/S-1FL7/S-1FK9/S-1FL5/S-1FK3/S-1FL4/S-1FK7/S-1FL3/S- [assistant](#message) IMOTICS L-1FN3/L-1FW3/L-4FN3/L-4FW3/L-4FN6/L-4FW6/L-4FN8/L-4FW8/L-4FN9/L-4FW9/L-4FN5/L-4FW5/L-4FN7/L-4FW7/L-4FN2/L-4FW2/L-4FN4/L-4FW4/L-MC100/MC200/MC300/MC400/MC500/MC600/MC700/MC800/MC900/MC1000/MC1100/MC1200/MC1300/MC1400/MC1500/MC1600/MC1700/MC1800/MC1900/MC2000/MC2100/MC2200/MC2300/MC2400/MC2500/MC2600/MC2700/MC2800/MC2900. Starter is suitable for users who need to commission and configure drives with advanced functionality and features.
Sinamics Startdrive
Sinamics Startdrive is a commissioning tool that allows you to communicate with your Siemens drives via PROFIBUS or PROFINET. You can use it to set parameters, read status information, perform tests, and troubleshoot errors. Sinamics Startdrive can also be integrated with TIA Portal, which enables you to access the drives from the TIA Portal project and archive data in the TIA Portal project. Sinamics Startdrive supports a wide range of Siemens drives, including SINAMICS G110/G110D/G110M/G120/G120D/G120P/G120X/G130/G150/G180/V20 /V90/V90PN/S110/S120/S150/S210/S300/S400. Sinamics Startdrive is suitable for users who need to commission and configure drives with advanced functionality and features.
Conclusion
Drivemonitor v5.5 is a comprehensive and versatile commissioning tool that allows you to communicate with various Siemens drives via serial interface or PROFIBUS. You can use it to set parameters, read status information, perform tests, and troubleshoot errors. You can also integrate it with Drive ES Basic, which enables you to access the drives from the SIMATIC Manager and archive data in the S7 project. Drivemonitor v5.5 is suitable for users who need to commission and configure drives with basic functionality and features.
However, Drivemonitor v5.5 is not the only commissioning tool available for Siemens drives. Depending on your drive type and application, you might want to consider other alternatives that offer different features and benefits, such as Drive ES Basic Maintenance, Starter, or Sinamics Startdrive. These tools allow you to communicate with various Siemens drives via PROFIBUS, PROFINET, or USB. You can also integrate them with TIA Portal, which enables you to access the drives from the TIA Portal project and archive data in the TIA Portal project. These tools are suitable for users who need to commission and configure drives with advanced functionality and features.
We hope this article has helped you understand what Drivemonitor v5.5 is, what features and benefits it offers, how to download and install it, how to use it, and what alternatives are available. If you have any questions or feedback, please feel free to contact us or leave a comment below.
FAQs
Here are some of the most frequently asked questions about Drivemonitor v5.5:
What is the difference between Drivemonitor v5.5 and Drive ES Basic?
Drivemonitor v5.5 is a standalone commissioning tool that allows you to communicate with various Siemens drives via serial interface or PROFIBUS. Drive ES Basic is a software package that includes Drivemonitor v5.5 and other components, such as Drive ES Basic Maintenance and Drive ES Basic SIMATIC. Drive ES Basic enables you to integrate Drivemonitor v5.5 with the SIMATIC Manager and archive data in the S7 project.
How can I get a license key for Drivemonitor v5.5?
To get a license key for Drivemonitor v5.5, you need to have a valid license and a registered account on the Siemens Industry Online Support website. You need to fill out and send the license key request form to Siemens, which you can find on the download page for Drivemonitor v5.5 under the following path:
You can also use the following direct link to access the download page:
How can I update Drivemonitor v5.5?
To update Drivemonitor v5.5, you need to download and install the latest service pack or hotfix from the Siemens Industry Online Support website. You can find the download link for Drivemonitor v5.5 updates under the following path:
You can also use the following direct link to access the download page:
How can I contact Siemens technical support for Drivemonitor v5.5?
To contact Siemens technical support for Drivemonitor v5.5, you can use the following options:
Call the Siemens Industry Technical Support hotline at +49 (911) 895-7222 or +49 (180) 5050-222.
Send an email to the Siemens Industry Technical Support team at support.automation@siemens.com.
Use the online contact form on the Siemens Industry Online Support website under the following path:
You can also use the following direct link to access the contact form:
Use the online chat function on the Siemens Industry Online Support website under the following path:
You can also use the following direct link to access the chat function:
44f88ac181
Comments